Heat Pumps
Modular Heat Pump
RECOVERY
Series
MCU-YHR

MCU modular heat pumps - environmentally safe type of equipment that efficiently creates a comfortable climate environment for various facilities. The modular heat pump is not only easily and quickly installed, but also has a moderate cost, which allows you to make stagewise investments

Heat pump of RECOVERY (MCU-YHR) series with complete heat recovery uses an environmentally friendly R410A refrigerant. The unit can operate in several modes: cooling, cooling + heat recovery, heating, hot water.

This heat pump is particularly relevant for facilities with the simultaneous demand for cooling and water heating, such as hotels, schools, restaurants, hospitals, sauna centers.

Cooling capacity: 66 kW

Heating capacity: 70 kW

Features

FEATURES:

  • Operation modes: cooling, cooling with recovery, heating, DHW, heating and DHW.
  • 100% recuperation in cooling mode.
  • Recovery module is made of copper for high water quality.
  • Maximum number of units combined - 16.
  • Recuperation capacity - 76 kW.

 

FREE HOT WATER

In cooling mode, the heat pump can use the waste heat from the consumer to provide free hot water up to 55 °C. This modular device replaces the boiler to meet the user's need for hot water, cuts initial investments and saves energy in an eco-friendly way for the environment.

COMPACT DESIGN

Apart from the standard functionality of a classic heat pump the compact design allows to provide an efficient heat recovery without the need to use significant additional floor space.

APPLICATION

Hotels, schools, other objects with the need for cold and hot water.

COOLING MODE

This mode can be used in summer or during the transition period, when there is a need only for cooling. The unit operates as a classic air-to-water heat pump.

HEAT RECOVERY MODE

This mode can be applied when there is a need for both cooling and hot water for domestic use. In this case, the heat pump automatically selects the most suitable mode of operation based on the needs for cooling and hot water heating.

WATER HEATING MODE

This mode can be used when only hot water is needed. In this case, the heat pump provides only hot water just like a classic air-to-water heat pump.

HEATING MODE

This mode can be used in winter and transition periods when only heating is required for the operation of the heating system. The unit operates as a classic air-to-water heat pump in a heating mode.

HEATING + HOT WATER

This mode can be applied during the winter and transition periods when both heating and hot water are needed. In this case, the Hot Water Heating mode is preferred as a default; then, when the demand for hot water is satisfied, the unit automatically switches to Heating mode to meet the heating needs. If needed, the priority can be changed.